No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are constantly functional is critical. In fact, bulbs are wearing devices that will surely burn out after a while and as a result need to be swapped out. You’re probably on this page because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Toyota Tacoma, we’ve written this content to enable you do it all on your own without having to go to your technician. To begin , we will take a look at inspecting a burnt-out rear turn signal bulb on your Toyota Tacoma and in a second part, how to change the rear turn signal bulb on your Toyota Tacoma.
How to be sure if the rear turn signal bulb on your Toyota Tacoma is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the opportunity to examine all the security features of your Toyota Tacoma. In fact, you are quite often in a hurry and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is as a result crucial to make the effort to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Tacoma, but you didn’t perceive it. Here are the two ordinary techniques to examine if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Toyota Tacoma, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Toyota Tacoma, you will perceive that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Toyota Tacoma or your position lights on Toyota Tacoma, don’t hesitate to consult our content articles to help you to achieve this replacement.
Replacing the rear turn signal bulb on my Toyota Tacoma
Now let’s go to the most instersting part of this content, how to change the rear turn signal bulb on Toyota Tacoma? Please be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Tacoma, see our dedicated article content. On the other hand, here are the full description to carry out in order to complete this act correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Toyota Tacoma. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working correctly
.
To find more tips on the Toyota Tacoma, take a look at the Toyota Tacoma category.
