Whether for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are constantly functioning is critical. In actual fact, bulbs are wearing devices that will surely burn out over time and therefore need to be replaced. You’re likely on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Toyota Camry, we’ve written and published this post to enable you do it without any help without having to go to your auto technician. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Toyota Camry and in a second step, how to change the rear turn signal bulb on your Toyota Camry.
How to be sure if the rear turn signal bulb on your Toyota Camry is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the occasion to verify all the safety features of your Toyota Camry. In actual fact, you are more often than not in a rush and are likely to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is due to this fact fundamental to take a little time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Camry, but you didn’t identify it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Toyota Camry, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Toyota Camry, you will detect that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Toyota Camry or your position lights on Toyota Camry, don’t be reluctant to consult our web content to help you to complete this substitution.
Changing the rear turn signal bulb on my Toyota Camry
Now let’s go to the most instersting step of this guideline, how to change the rear turn signal bulb on Toyota Camry? Please note that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Camry, see our dedicated content. On the other hand, here are the detailed steps to stick to to be able to do this process correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Toyota Camry. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning correctly
.
If you need more guides on the Toyota Camry, go to our Toyota Camry category.
