Whether for your own safety, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are always functional is fundamental. Obviously, bulbs are wearing parts that will predictably burn out in the long run and consequently need to be replaced. You’re most certainly on this website because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Chevrolet Impala, we’ve created this article to teach you do it on your own without having to go to your auto mechanic. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Chevrolet Impala and in a second part, how to change the rear turn signal bulb on your Chevrolet Impala.
How to be sure if the rear turn signal bulb on your Chevrolet Impala is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the opportunity to verify all the safety features of your Chevrolet Impala. Obviously, you are often times on the go and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is due to this fact important to take a little time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Impala, but you didn’t detect it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Chevrolet Impala, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Chevrolet Impala, you will detect that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Impala or your position lights on Chevrolet Impala, don’t hesitate to read our articles to help you to do this replacement.
Changing the rear turn signal bulb on my Chevrolet Impala
Now let’s go to the most instersting part of this article, how to change the rear turn signal bulb on Chevrolet Impala? Please note that this technique is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Impala, see our dedicated guideline. Nevertheless, here are the full description to follow to be able to complete this work accurately:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Chevrolet Impala. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning correctly
.
In the event that you have any additional questions about the Chevrolet Impala, do not hesitate to consult our Chevrolet Impala category.
