No matter if it’s for your personal safety, for roadworthiness evaluation or to avoid a fine, being sure your turn signal bulbs are constantly functional is very important. Surely, bulbs are wearing devices that will inevitably burn out after a while and therefore need to be replaced. You’re almost certainly here because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Subaru Forester, we’ve made this article to teach you do it alone without having to go to your technician. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Subaru Forester and in a second step, how to change the rear turn signal bulb on your Subaru Forester.
How to be sure if the rear turn signal bulb on your Subaru Forester is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the possibility to examine all the safety features of your Subaru Forester. Surely, you are often times on the go and are likely to get into your vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result crucial to make the effort to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Subaru Forester, but you didn’t identify it. Here are the two ordinary methods to examine if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Subaru Forester, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By listening to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Subaru Forester, you will detect that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Subaru Forester or your position lights on Subaru Forester, don’t hesitate to consult our web content to help you to achieve this replacement.
Changing the rear turn signal bulb on my Subaru Forester
Now let’s go to the most important step of this content page, how to change the rear turn signal bulb on Subaru Forester? Take note that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Subaru Forester, see our dedicated content. On the other hand, here are the detailed steps to adhere to to be able to conduct this act accurately:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Subaru Forester. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way
.
To discover more tips on the Subaru Forester, take a look at the Subaru Forester category.
