No matter if it’s for your own security, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are all the time functioning is necessary. Indeed, bulbs are wearing auto parts that will obviously burn out after a while and therefore need to be replaced. You’re certainly here because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Toyota Sienna, we’ve written this article to enable you do it without any help without having to go to your motor mechanic. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your Toyota Sienna and in a second part, how to replace the rear turn signal bulb on your Toyota Sienna.
How to be sure if the rear turn signal bulb on your Toyota Sienna is burnt-out or needs to be replaced?
When you drive your car you don’t all the time have the occasion to check all the security features of your Toyota Sienna. Indeed, you are often in a rush and tend to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact fundamental to take some time to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Sienna, but you didn’t identify it. Here are the two simple ways to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Toyota Sienna, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Toyota Sienna, you will perceive that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Toyota Sienna or your position lights on Toyota Sienna, don’t be reluctant to consult our articles to help you to achieve this substitution.
Changing the rear turn signal bulb on my Toyota Sienna
Now let’s go to the most instersting part of this content page, how to replace the rear turn signal bulb on Toyota Sienna? Take note that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Sienna, see our specific content page. Nevertheless, here are the detailed description to carry out to be able to complete this work accurately:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Toyota Sienna. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning correctly
.
If perhaps you have any further questions about the Toyota Sienna, do not hesitate to consult our Toyota Sienna category.
