Whether for your personal safety, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are always functional is fundamental. Indeed, bulbs are wearing parts that will inevitably burn out in the long run and therefore need to be swapped out. You’re most probably in this article because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Chevrolet Colorado, we’ve created this content to enable you do it alone without having to go to your motor mechanic. In a first step, we will look at examining a burnt-out rear turn signal bulb on your Chevrolet Colorado and in a second step, how to change the rear turn signal bulb on your Chevrolet Colorado.
How to find out if the rear turn signal bulb on your Chevrolet Colorado is burnt-out or needs to be replaced?
When you drive your automobile you don’t always have the opportunity to verify all the safety features of your Chevrolet Colorado. Indeed, you are generally on the go and are likely to get into your automobile, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore crucial to take the time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Colorado, but you didn’t identify it. Here are the two ordinary methods to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Chevrolet Colorado, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Chevrolet Colorado, you will perceive that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Colorado or your position lights on Chevrolet Colorado, don’t hesitate to consult our content articles to help you to do this substitution.
Changing the rear turn signal bulb on my Chevrolet Colorado
Now let’s go to the most important step of this article, how to change the rear turn signal bulb on Chevrolet Colorado? Please note that this procedure is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Colorado, see our specific article content. However, here are the full description to stick to in order to conduct this act properly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Chevrolet Colorado. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating correctly
.
In the event that you have any further questions about the Chevrolet Colorado, do not hesitate to consult our Chevrolet Colorado category.
