Whether for your own safety, for roadworthiness testing or to prevent a fine, ensuring your turn signal bulbs are always functioning is imperative. Obviously, bulbs are wearing parts that will inevitably burn out in the long run and as a result need to be swapped out. You’re likely on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Renault Captur, we’ve put into writing this article to teach you do it all on your own without having to go to your repair shop. In a first step, we will look at the checking a burnt-out rear turn signal bulb on your Renault Captur and in a second step, how to change the rear turn signal bulb on your Renault Captur.
How do you know if the rear turn signal bulb on your Renault Captur is burnt-out or needs to be replaced?
When you drive your car you don’t always have the possibility to verify all the safety features of your Renault Captur. Obviously, you are often times in a hurry and tend to get into your car, make your trip and put it down right away without taking the time to do an occasional check-up. It is due to this fact essential to take some time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Renault Captur, but you didn’t detect it. Here are the two simple methods to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Renault Captur, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Renault Captur, you will notice that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Renault Captur or your position lights on Renault Captur, don’t be reluctant to have a look at our web content to help you to do this replacement.
Replacing the rear turn signal bulb on my Renault Captur
Now let’s go to the most instersting step of this guideline, how to change the rear turn signal bulb on Renault Captur? Please be aware that this operation is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Renault Captur, see our specific guideline. However, here are the detailed description to stick to in order to perform this act properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Renault Captur. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning correctly
.
If you wish more guides on the Renault Captur, go to our Renault Captur category.
