Whether for your own security, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are constantly functioning is critical. Obviously, bulbs are wearing parts that will predictably burn out after a while and consequently need to be swapped out. You’re certainly in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Nissan Xterra, we’ve written this article to help you do it without any help without having to go to your mechanic. In a first step, we will examine examining a burnt-out rear turn signal bulb on your Nissan Xterra and in a second step, how to change the rear turn signal bulb on your Nissan Xterra.


How to be sure if the rear turn signal bulb on your Nissan Xterra is burnt-out or needs to be changed?

When you drive your vehicle you don’t constantly have the possibility to examine all the security features of your Nissan Xterra. Obviously, you are quite often in a hurry and are likely to get into your vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result essential to take some time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Nissan Xterra, but you didn’t identify it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to change it as soon as possible:

  • When you stop, turn on the ignition on your Nissan Xterra, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
  • By paying attention to the sound of your turn signals. In actual fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Nissan Xterra, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to change, like the one of your low beam Nissan Xterra or your position lights on Nissan Xterra, don’t be reluctant to read our content articles to help you to achieve this replacing.

Changing the rear turn signal bulb on my Nissan Xterra

Now let’s go to the most instersting step of this content, how to change the rear turn signal bulb on Nissan Xterra? You should be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Nissan Xterra, see our specific guideline. However, here are the full description to adhere to to be able to perform this act properly:

  • To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Nissan Xterra. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning properly

To get more tips on the Nissan Xterra, take a look at the Nissan Xterra category.