Whether for your personal safety, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are all the time functioning is imperative. In reality, bulbs are wearing parts that will predictably burn out after a while and as a result need to be replaced. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Nissan Juke, we’ve written this content to help you do it alone without having to go to your auto mechanic. In a first step, we will have a look at inspecting a burnt-out rear turn signal bulb on your Nissan Juke and in a second step, how to replace the rear turn signal bulb on your Nissan Juke.
How do you know if the rear turn signal bulb on your Nissan Juke is burnt-out or needs to be changed?
When you drive your car you don’t all the time have the opportunity to check all the safety features of your Nissan Juke. In reality, you are often in a rush and are likely to get into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take the time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Nissan Juke, but you didn’t notice it. Here are the two basic methods to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Nissan Juke, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Nissan Juke, you will notice that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Nissan Juke or your position lights on Nissan Juke, don’t be reluctant to browse our web content to help you to do this substitution.
Replacing the rear turn signal bulb on my Nissan Juke
Now let’s go to the most instersting step of this content, how to replace the rear turn signal bulb on Nissan Juke? Take note that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Nissan Juke, see our specific article content. On the other hand, here are the detailed steps to carry out in order to conduct this process correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Nissan Juke. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working properly
.
In the event that you have any additional questions about the Nissan Juke, do not hesitate to consult our Nissan Juke category.
