When your car is running normally everything is fine, nevertheless if it starts to have frequent complications you might begin to question, especially if your car won’t start. In this article we will teach you where the starter of a Nissan Juke is, it will help you to solve your ignition complications. To do this, we will first explain the role of a starter, then, where is the starter on a Nissan Juke , and, finally, how to replace the starter of a car.

find-starter-nissan-juke

Purpose of the starter on your Nissan Juke

We begin this content by detailing the role of the starter motor on your Nissan Juke. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three most important parts:

  • The Solenoid: This part is an electrical relay that will work as a switch, it will be activated by the key of your Nissan Juke and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your Nissan Juke and create enough speed for your engine unit to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transmit the force from the starter to the engine.

Where is the starter on a Nissan Juke?

Now that we have fairly quickly described what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter found on a Nissan Juke? It is quite easy to locate a starter, obviously, it is a large part that will almost always be situated in a similar location. We let you discover the two possible spots for your car starter down below.

Location of the starter on traditional Nissan Juke

First and most common case, where to locate the starter of a Nissan Juke with a conventional motor (implied without start and stop). The starter has a specific action, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine unit.

Location of the starter to Nissan Juke with start and stop

And now second possible starter location of your Nissan Juke . This case is much less frequent. It only is about engines built with start and stop, and a good part of them will be equipped with a starter situated close to the flywheel. Nevertheless, on some specific series or engines, the starter of your Nissan Juke might be included in your alternator, it is then named a starter-alternator, to locate it nothing easier, identify your accessory belt and you should see the big starter block.

How to replace the starter on a Nissan Juke?

Finally, we’ll describe to you quite fairly quickly how to replace the starter of a Nissan Juke. This process is not actually complex, it can be considered by people who have a minimum of basic mechanical expertise and adapted tools. Adhere to down below the most important steps to carry out this intervention:

  • Disconnect the battery on your Nissan Juke, if you don’t know how to do it, don’t hesitate to seek advice from our content which points out how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Nissan Juke, nevertheless before doing so we advise you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to take out it you might need to take out parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you need more tutorials on the Nissan Juke, go to our Nissan Juke category.