No matter if it’s for your own safety, for roadworthiness testing or to prevent a fine, being sure your turn signal bulbs are all the time working is necessary. In reality, bulbs are wearing parts that will predictably burn out over time and therefore need to be swapped out. You’re almost certainly on this website because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Mitsubishi Asx, we’ve posted this content to teach you do it alone without having to go to your technician. In a first step, we will look at examining a burnt-out rear turn signal bulb on your Mitsubishi Asx and in a second part, how to change the rear turn signal bulb on your Mitsubishi Asx.
How to be sure if the rear turn signal bulb on your Mitsubishi Asx is burnt-out or needs to be replaced?
When you drive your automobile you don’t all the time have the opportunity to verify all the safety features of your Mitsubishi Asx. In reality, you are often times in a hurry and tend to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore fundamental to take some time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mitsubishi Asx, but you didn’t detect it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Mitsubishi Asx, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Mitsubishi Asx, you will perceive that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Mitsubishi Asx or your position lights on Mitsubishi Asx, don’t hesitate to read our content articles to help you to do this replacing.
Changing the rear turn signal bulb on my Mitsubishi Asx
Now let’s go to the most important part of this guideline, how to change the rear turn signal bulb on Mitsubishi Asx? Please note that this technique is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mitsubishi Asx, see our dedicated article content. Nevertheless, here are the detailed steps to stick to to be able to accomplish this process accurately:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Mitsubishi Asx. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
To get more tips on the Mitsubishi Asx, take a look at the Mitsubishi Asx category.
