No matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is imperative. Obviously, bulbs are wearing parts that will surely burn out as time passes and as a result need to be replaced. You’re most probably here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Mazda 2, we’ve written this content to enable you do it all on your own without having to go to your auto technician. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your Mazda 2 and in a second part, how to change the rear turn signal bulb on your Mazda 2.
How to find out if the rear turn signal bulb on your Mazda 2 is burnt-out or needs to be changed?
When you drive your car you don’t always have the opportunity to check all the safety features of your Mazda 2. Obviously, you are generally in a rush and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore necessary to spend some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mazda 2, but you didn’t identify it. Here are the two ordinary ways to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Mazda 2, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Mazda 2, you will recognise that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Mazda 2 or your position lights on Mazda 2, don’t hesitate to consult our web content to help you to complete this replacing.
Changing the rear turn signal bulb on my Mazda 2
Now let’s go to the most important part of this article, how to change the rear turn signal bulb on Mazda 2? You should be aware that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mazda 2, see our dedicated guideline. Nevertheless, here are the detailed steps to stick to to be able to conduct this act correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Mazda 2. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating in the right way
.
If perhaps you have any additional questions about the Mazda 2, do not hesitate to consult our Mazda 2 category.
