Recent cars all come with an astounding amount of options, however, because of your budget or the year of your Mazda 2, you may not be fortunate enough to have them all. On this page we’re going to help you correct this issue by showing how to install parking sensor on my Mazda 2? In reality, this option is very helpful, especially if you live in the city and have to park your car habitually in narrow parking spots. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Mazda 2, and to conclude, how much does a parking sensor cost?
How does parking sensors function on an Mazda 2?
So we commence with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Mazda 2 and an obstacle when you maneuver. It is as a result mainly good for people who have to maneuver frequently, whose field of vision is bad, or whose vehicle size is large.
Often fitted as standard, the reverse sensors of a Mazda 2 is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will increase in level with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Mazda 2 will help you for parking, but as well for safety and avoiding pedestrians.
How to install parking sensors on a Mazda 2?
We now advance to the section that you are quite likely most excited about, fitting reverse parking sensors on a Mazda 2. This part is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Mazda 2.
How to replace a faulty backup sensors on a Mazda 2
First we’ll see how to replace a faulty parking sensor on an Mazda 2. If your Mazda 2 has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function properly. Thankfully for you this process is particularly simple, you can even carry it out yourself without any specified mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take out the broken parking sensor from your Mazda 2, this step is fairly intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating properly.
- You will just need to stick to the installation instructions, but we summarize here the main simple steps.
- Take out the bumper if you don’t have access to the inside of it.
- Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Follow the installation instructions which is accessible with some electrical knowledges.
- Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Mazda 2
Now we move on to the part you’re quite likely most excited about, how to install a reverse sensor set up on a Mazda 2 that doesn’t have one? As we mentioned earlier, you’re lucky because many of OEMs now sell automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these versions in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will certainly have to remove the bumper of your Mazda 2 for the installation, do not be reluctant to consult our article on this subject matter to learn the method to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mazda 2
And to conclude, we will now present you the installation of a drill-free parking sensors system on a Mazda 2. There are two sort, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Mazda 2?
Price of swapping a faulty reversing parking sensor for an Mazda 2
The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Mazda 2
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class kit.
Price of a parking sensors kit without drilling for a Mazda 2
.
Finally, for the price of a reversing radar without drilling for your Mazda 2, no matter what type you choose, you will have to spend between 30 and 60 euros.
To find more tips on the Mazda 2, take a look at the Mazda 2 category.
