No matter if it’s for your personal safety, for roadworthiness evaluation or to prevent a fine, making sure your turn signal bulbs are constantly working is critical. Surely, bulbs are wearing parts that will obviously burn out with time and consequently need to be swapped out. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you hyundai i20, we’ve written this article to teach you do it by yourself without having to go to your auto mechanic. In a first step, we will look at examining a burnt-out rear turn signal bulb on your hyundai i20 and in a second part, how to replace the rear turn signal bulb on your hyundai i20.
How to find out if the rear turn signal bulb on your hyundai i20 is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the opportunity to verify all the safety features of your hyundai i20. Surely, you are more often than not in a rush and are likely to get into your automobile, make your journey and put it down straight away without taking the time to do an occasional check-up. It is therefore crucial to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your hyundai i20, but you didn’t perceive it. Here are the two ordinary solutions to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your hyundai i20, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your hyundai i20, you will detect that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam hyundai i20 or your position lights on hyundai i20, don’t hesitate to read our publications to help you to complete this replacing.
Changing the rear turn signal bulb on my hyundai i20
Now let’s go to the most instersting part of this article content, how to replace the rear turn signal bulb on hyundai i20? You should be aware that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your hyundai i20, see our dedicated article. On the other hand, here are the detailed steps to follow to be able to complete this work properly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your hyundai i20. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
If you wish more guides on the hyundai i20, go to our hyundai i20 category.
