No matter if it’s for your own safety, for roadworthiness tests or to prevent a fine, being certain your turn signal bulbs are all the time functioning is fundamental. Obviously, bulbs are wearing parts that will inevitably burn out after a while and as a result need to be replaced. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Hyundai Ix35, we’ve written and published this content to enable you do it without any help without having to go to your auto technician. To begin , we will examine examining a burnt-out rear turn signal bulb on your Hyundai Ix35 and in a second part, how to change the rear turn signal bulb on your Hyundai Ix35.
How do you know if the rear turn signal bulb on your Hyundai Ix35 is burnt-out or needs to be replaced?
When you drive your automobile you don’t all the time have the occasion to examine all the safety features of your Hyundai Ix35. Obviously, you are often times in a rush and tend to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result essential to take some time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Hyundai Ix35, but you didn’t detect it. Here are the two simple methods to examine if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Hyundai Ix35, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Hyundai Ix35, you will perceive that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Hyundai Ix35 or your position lights on Hyundai Ix35, don’t be reluctant to read our articles to help you to complete this replacement.
Changing the rear turn signal bulb on my Hyundai Ix35
Now let’s go to the most important part of this content, how to change the rear turn signal bulb on Hyundai Ix35? You should be aware that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Hyundai Ix35, see our specific article content. On the other hand, here are the detailed steps to adhere to in order to accomplish this process properly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Hyundai Ix35. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working correctly
.
To find more tips on the Hyundai Ix35, take a look at the Hyundai Ix35 category.
