Whether for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly working is necessary. Indeed, bulbs are wearing parts that will surely burn out in the long run and therefore need to be replaced. You’re likely on this page because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Ford Explorer, we’ve written and published this post to enable you do it alone without having to go to your mechanic. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Ford Explorer and in a second part, how to change the rear turn signal bulb on your Ford Explorer.
How to find out if the rear turn signal bulb on your Ford Explorer is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the occasion to verify all the safety features of your Ford Explorer. Indeed, you are often in a hurry and tend to get into your automobile, make your journey and put it down straight away without taking the time to do an occasional check-up. It is due to this fact fundamental to make the effort to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Explorer, but you didn’t perceive it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Ford Explorer, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functional.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Ford Explorer, you will notice that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Ford Explorer or your position lights on Ford Explorer, don’t hesitate to have a look at our articles to help you to achieve this substitution.
Replacing the rear turn signal bulb on my Ford Explorer
Now let’s go to the most important part of this guideline, how to change the rear turn signal bulb on Ford Explorer? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Explorer, see our dedicated guideline. Nevertheless, here are the detailed description to follow to be able to conduct this act properly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ford Explorer. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
Whenever you have any further questions about the Ford Explorer, do not hesitate to consult our Ford Explorer category.
