No matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly working is fundamental. In actual fact, bulbs are wearing devices that will obviously burn out over time and consequently need to be swapped out. You’re certainly on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Fiat Ducato 2, we’ve written and published this content to help you do it without any help without having to go to your motor mechanic. To begin , we will take a look at inspecting a burnt-out rear turn signal bulb on your Fiat Ducato 2 and in a second step, how to change the rear turn signal bulb on your Fiat Ducato 2.
How to find out if the rear turn signal bulb on your Fiat Ducato 2 is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the occasion to verify all the safety features of your Fiat Ducato 2. In actual fact, you are often in a rush and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is as a result essential to take the time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Ducato 2, but you didn’t detect it. Here are the two ordinary methods to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Fiat Ducato 2, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In truth, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Fiat Ducato 2, you will notice that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Fiat Ducato 2 or your position lights on Fiat Ducato 2, don’t be reluctant to consult our articles to help you to achieve this substitution.
Changing the rear turn signal bulb on my Fiat Ducato 2
Now let’s go to the most important step of this content page, how to change the rear turn signal bulb on Fiat Ducato 2? You should be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Ducato 2, see our dedicated content page. However, here are the detailed steps to stick to to be able to accomplish this act properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Fiat Ducato 2. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
If you need more guides on the Fiat Ducato 2, go to our Fiat Ducato 2 category.
