It doesn’t matter if you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic modification, and in this article content, we will see how to adjust the low beam lights of your Fiat Ducato 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Ducato 2.
Why set the low beam lights of your Fiat Ducato 2?
So let’s begin our article content with the point of adjusting the low beam lights of your Fiat Ducato 2. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your Fiat Ducato 2 are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Fiat Ducato 2 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Fiat Ducato 2 must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat Ducato 2 for law motives
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Ducato 2?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Fiat Ducato 2? This setting may appear a bit complex, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Fiat Ducato 2
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Ducato 2
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat Ducato 2 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Fiat Ducato 2 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Fiat Ducato 2, please read our article content on this subject.
If you need more tutorials on the Fiat Ducato 2, go to our Fiat Ducato 2 category.
