No matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your turn signal bulbs are always functioning is extremely important. In reality, bulbs are wearing parts that will inevitably burn out in the long run and consequently need to be swapped out. You’re probably in this article because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Fiat Bravo, we’ve written this post to enable you do it by yourself without having to go to your motor mechanic. In a first step, we will have a look at the checking a burnt-out rear turn signal bulb on your Fiat Bravo and in a second step, how to replace the rear turn signal bulb on your Fiat Bravo.
How do you know if the rear turn signal bulb on your Fiat Bravo is burnt-out or needs to be replaced?
When you drive your automobile you don’t always have the occasion to check all the safety features of your Fiat Bravo. In reality, you are quite often in a hurry and are likely to get into your automobile, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact crucial to make the effort to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Bravo, but you didn’t become aware of it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Fiat Bravo, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
- By listening to the sound of your turn signals. In fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Fiat Bravo, you will detect that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Fiat Bravo or your position lights on Fiat Bravo, don’t hesitate to have a look at our content articles to help you to realize this replacement.
Replacing the rear turn signal bulb on my Fiat Bravo
Now let’s go to the most important step of this content, how to replace the rear turn signal bulb on Fiat Bravo? You should be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Bravo, see our specific content. On the other hand, here are the full description to follow to be able to perform this work correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Fiat Bravo. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way
.
If perhaps you have any additional questions about the Fiat Bravo, do not hesitate to consult our Fiat Bravo category.
