Regardless for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always operational is extremely important. In fact, bulbs are wearing parts that will predictably burn out in the future and therefore need to be changed. You’re most certainly here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Fiat Bravo, we’ve made this content page to help you do it by yourself and not have to go to your auto mechanic. In a first part, we will examine the checking a burnt-out front turn signal bulb on your Fiat Bravo and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-bravo

How to recognise if the front turn signal bulb on your Fiat Bravo is burnt out or needs to be replaced?

When you drive your car you don’t constantly have the possibility to verify all the safety equipments of your Fiat Bravo. In fact, you are often in a hurry and tend to enter into your car, make your journey and put it down instantly without taking the time to do an periodic check-up. It is as a result crucial to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Bravo, but that you didn’t become aware of it. Here are the two simple ways to control if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Fiat Bravo, you will recognise that the time between each “click” is much shorter, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to accomplish this replacing.

Replacing the front turn signal bulb on your Fiat Bravo

Now let’s go to the most significant part of this content page, how to replace the front turn signal bulb of your Fiat Bravo? Please be aware that this procedure is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Fiat Bravo. If it is a bulb on your rear turn signal, see our special content page. Nevertheless, here are the details of the guidelines to stick to to be able to execute this action accurately dependant on the method you wish to adopt.

Change front turn signal bulb on your Fiat Bravo through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Bravo by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Fiat Bravo through the wheel arch:

    This methodology is in particular effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Fiat Bravo through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them right now:

    • Put your Fiat Bravo on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be fragile.
    • Take off your headlight block and swap the front turn indicator bulb of your Fiat Bravo following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you need more tutorials on the Fiat Bravo, go to our Fiat Bravo category.