Whether for your own security, for roadworthiness evaluation or to avoid a fine, ensuring your turn signal bulbs are constantly functional is fundamental. In fact, bulbs are wearing auto parts that will obviously burn out over time and therefore need to be replaced. You’re most likely on this page because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Fiat 500 L, we’ve posted this content to enable you do it alone without having to go to your motor mechanic. To begin , we will look at the checking a burnt-out rear turn signal bulb on your Fiat 500 L and in a second part, how to replace the rear turn signal bulb on your Fiat 500 L.
How to find out if the rear turn signal bulb on your Fiat 500 L is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the occasion to examine all the security features of your Fiat 500 L. In fact, you are quite often on the go and are likely to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result fundamental to spend some time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat 500 L, but you didn’t identify it. Here are the two simple techniques to examine if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Fiat 500 L, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Fiat 500 L, you will recognize that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Fiat 500 L or your position lights on Fiat 500 L, don’t be reluctant to consult our articles to help you to complete this replacement.
Replacing the rear turn signal bulb on my Fiat 500 L
Now let’s go to the most important part of this content, how to replace the rear turn signal bulb on Fiat 500 L? You should be aware that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat 500 L, see our specific guideline. However, here are the detailed steps to adhere to in order to perform this process correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Fiat 500 L. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working effectively
.
If you need more guides on the Fiat 500 L, go to our Fiat 500 L category.
