No matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are all the time functional is necessary. In fact, bulbs are wearing auto parts that will predictably burn out over time and therefore need to be replaced. You’re most probably on this page because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Chevrolet Bolt, we’ve written and published this article to teach you do it all on your own without having to go to your auto mechanic. To begin , we will examine inspecting a burnt-out rear turn signal bulb on your Chevrolet Bolt and in a second part, how to change the rear turn signal bulb on your Chevrolet Bolt.
How to find out if the rear turn signal bulb on your Chevrolet Bolt is burnt-out or needs to be replaced?
When you drive your car you don’t all the time have the possibility to examine all the security features of your Chevrolet Bolt. In fact, you are often in a rush and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is as a result fundamental to spend some time to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Bolt, but you didn’t identify it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Chevrolet Bolt, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Chevrolet Bolt, you will notice that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Bolt or your position lights on Chevrolet Bolt, don’t be reluctant to have a look at our content articles to help you to complete this substitution.
Replacing the rear turn signal bulb on my Chevrolet Bolt
Now let’s go to the most instersting part of this article content, how to change the rear turn signal bulb on Chevrolet Bolt? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Bolt, see our dedicated article. However, here are the full description to follow to be able to complete this process correctly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Chevrolet Bolt. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working correctly
.
If you wish more guides on the Chevrolet Bolt, go to our Chevrolet Bolt category.
