No matter if it’s for your personal security, for roadworthiness evaluation or to avoid a fine, making sure your turn signal bulbs are always functional is fundamental. In truth, bulbs are wearing parts that will surely burn out with time and therefore need to be swapped out. You’re most likely here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Audi A6, we’ve created this content to enable you do it on your own without having to go to your auto technician. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Audi A6 and in a second step, how to replace the rear turn signal bulb on your Audi A6.

change-rear-turn-bulb-audi-a6

How to be sure if the rear turn signal bulb on your Audi A6 is burnt-out or needs to be changed?

When you drive your vehicle you don’t always have the possibility to check all the security features of your Audi A6. In truth, you are often in a hurry and are likely to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact necessary to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Audi A6, but you didn’t become aware of it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Audi A6, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
  • By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Audi A6, you will detect that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to replace, like the one of your low beam Audi A6 or your position lights on Audi A6, don’t hesitate to browse our publications to help you to complete this replacement.

Replacing the rear turn signal bulb on my Audi A6

Now let’s go to the most instersting step of this content page, how to replace the rear turn signal bulb on Audi A6? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Audi A6, see our dedicated content. On the other hand, here are the full description to stick to in order to complete this act accurately:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Audi A6. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working effectively

To discover more tips on the Audi A6, take a look at the Audi A6 category.