No matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, being certain your turn signal bulbs are constantly functional is critical. In reality, bulbs are wearing devices that will obviously burn out in the long run and as a result need to be swapped out. You’re likely in this article because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Buick Enclave, we’ve written this article to help you do it on your own without having to go to your auto technician. To begin , we will take a look at examining a burnt-out rear turn signal bulb on your Buick Enclave and in a second part, how to replace the rear turn signal bulb on your Buick Enclave.


How to find out if the rear turn signal bulb on your Buick Enclave is burnt-out or needs to be replaced?

When you drive your car you don’t constantly have the occasion to verify all the safety features of your Buick Enclave. In reality, you are generally in a rush and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore fundamental to take some time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Buick Enclave, but you didn’t perceive it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your Buick Enclave, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
  • By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Buick Enclave, you will perceive that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.

You may have another bulb to replace, like the one of your low beam Buick Enclave or your position lights on Buick Enclave, don’t hesitate to read our web content to help you to achieve this replacement.

Replacing the rear turn signal bulb on my Buick Enclave

Now let’s go to the most important part of this content page, how to replace the rear turn signal bulb on Buick Enclave? Please note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Buick Enclave, see our specific content. On the other hand, here are the detailed steps to carry out to be able to perform this process properly:

  • To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Buick Enclave. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively

If you need more tutorials on the Buick Enclave, go to our Buick Enclave category.