No matter if it’s for your own security, for roadworthiness testing or to prevent a fine, ensuring that your turn signal bulbs are constantly functioning is fundamental. In fact, bulbs are wearing devices that will surely burn out after a while and therefore need to be swapped out. You’re most likely on this page because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Audi Q2, we’ve put into writing this post to teach you do it alone without having to go to your repair shop. In a first step, we will look at inspecting a burnt-out rear turn signal bulb on your Audi Q2 and in a second step, how to replace the rear turn signal bulb on your Audi Q2.
How to find out if the rear turn signal bulb on your Audi Q2 is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the possibility to verify all the security features of your Audi Q2. In fact, you are quite often on the go and tend to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact important to make the effort to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Audi Q2, but you didn’t detect it. Here are the two simple solutions to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Audi Q2, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Audi Q2, you will perceive that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Audi Q2 or your position lights on Audi Q2, don’t hesitate to have a look at our articles to help you to achieve this replacing.
Changing the rear turn signal bulb on my Audi Q2
Now let’s go to the most important step of this guideline, how to replace the rear turn signal bulb on Audi Q2? You should be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Audi Q2, see our specific article content. However, here are the detailed steps to adhere to to be able to accomplish this work properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Audi Q2. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning properly
.
To get more tips on the Audi Q2, take a look at the Audi Q2 category.
