Whether for your personal safety, for roadworthiness evaluation or to avoid a fine, ensuring your turn signal bulbs are constantly functioning is necessary. Indeed, bulbs are wearing auto parts that will predictably burn out in the long run and as a result need to be swapped out. You’re certainly on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Acura MDX, we’ve written this content to teach you do it on your own without having to go to your auto mechanic. To begin , we will check out inspecting a burnt-out rear turn signal bulb on your Acura MDX and in a second part, how to change the rear turn signal bulb on your Acura MDX.
How to find out if the rear turn signal bulb on your Acura MDX is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the possibility to verify all the safety features of your Acura MDX. Indeed, you are often times on the go and tend to get into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result essential to spend some time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Acura MDX, but you didn’t become aware of it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Acura MDX, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Acura MDX, you will recognize that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Acura MDX or your position lights on Acura MDX, don’t be reluctant to browse our publications to help you to achieve this substitution.
Replacing the rear turn signal bulb on my Acura MDX
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Acura MDX? You should be aware that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Acura MDX, see our dedicated content page. However, here are the detailed steps to carry out to be able to perform this work properly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Acura MDX. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating effectively
.
To find more tips on the Acura MDX, take a look at the Acura MDX category.
