Regardless whether it’s for your personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly working is quite important. In fact, bulbs are wearing parts that will surely burn out over time and consequently need to be replaced. You’re most likely on this website because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Ram ProMaster City parking light, we’ve posted this article content to help you do this action by yourself and not need to go to your auto mechanic. In a first part, we will take a look at changing the front daytime running light bulb of your car and in a second art, how to change the rear daytime running light.
How to change the front parking light bulb of my Ram ProMaster City?
We will commence this document with changing the front daytime running light bulb of your Ram ProMaster City, take note that depending on the year and finish of your car it may not be quite the same technique to use. In fact, regardless if the location of your bulb is not going to change, the access may be more or less complicated based on the features of your car.
First technique, we will execute the bulb change of your daytime running light without taking out the headlight of your Ram ProMaster City. Although this approach is the easiest, it is not guaranteed that you will be able to perform it on your automobile without trouble. In fact, depending on the versions and the year, on some versions there will not be enough space for you to change the bulb like this. Here are the two distinct techniques to change the bulb of the front parking light of your Ram ProMaster City:.
- Going through the bonnet of your car: First technique, you will simply go through the bonnet of your automobile to access your headlight unit. This is the most rational solution but it is not always easy to do to achieve, generally because of secondary auto parts that will block your access. To get this done, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your Ram ProMaster City. You might need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its location. To get this done, pull gently on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can change your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the system, reconnect your battery and carry out a check test before taking to the road.
- By taking out the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Ram ProMaster City if the access through the engine block seems too difficult. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are completed you will only have to follow the same methodology as on the previous section to change the front daytime running light bulb of your Ram ProMaster City
.
How to change the rear parking light bulb on your Ram ProMaster City
To finish , if you need to swap the rear parking light bulb of your Ram ProMaster City the process is more simple, here are the different steps to follow to allow you to swap this bulb:
- Unplug your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Ram ProMaster City, please browse our specific document to discover how to do it.
If you have any further questions about the Ram ProMaster City, do not hesitate to consult our Ram ProMaster City category.
