Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Ram ProMaster City is one of the most classics. Nevertheless this work is simple to do, some of you are probably wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Ram ProMaster City? We will now answer these questions.
Advantage to always have the brake fluid level up in your Ram ProMaster City
So we begin our content page with the interest of checking the brake fluid level on a Ram ProMaster City. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently necessary to examine the brake fluid level of your Ram ProMaster City regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid loses its properties. This process is particularly simple and does not require advanced expertise of mechanics, so it is easy for all Ram ProMaster City owners to do it themselves. If the Brake light on the dashboard of your Ram ProMaster City does not correspond to a lack of brake fluid, do not be reluctant to browse our content page for details. On the other hand, there are some safety measures and rules to respect that we will check out in the up coming section of this content page.
How to fill up the brake fluid of a Ram ProMaster City
So now we will show to you how to do the brake fluid level on a Ram ProMaster City. Please take note that this is very simple to perform. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your Ram ProMaster City. Now here are the steps to adhere to to make your level:
- Open your cover and situate your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
- Once discovered, examine the instructions on the cap attentively so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ram ProMaster City up to the mark “Max”.
- If the level was beneath the “Min” mark before you checked the brake fluid level in your Ram ProMaster City, make sure examine the level in a few days/weeks to be certain you don’t have a leak in the brake system
That’s it, you now have all the data you need to properly fill the brake fluid level of your Ram ProMaster City.
If you need more guides on the Ram ProMaster City, go to our Ram ProMaster City category.