Whether it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functional is quite important. In reality, bulbs are wearing parts that will inevitably burn out over time and consequently need to be swapped out. You’re most likely here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Ram P/U parking light, we’ve written this content to help you do this process without help and not need to go to your motor mechanic. In a first step, we will look at changing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Ram P/U?
We will start this document with changing the front daytime running light bulb of your Ram P/U, remember that depending on the year and finish of your motor vehicle it may not be quite the same technique to use. In reality, even if the location of your bulb is not going to change, the access may be more or less challenging depending on the features of your car.
First technique, we will execute the bulb change of your daytime running light without taking out the headlight of your Ram P/U. Although this technique is the easiest, it is not assured that you will be in a position to execute it on your car without trouble. In reality, dependant on the options and the year, on some models there will not be enough space for you to swap the bulb by doing this. Here are the two distinct methods to swap the bulb of the front parking light of your Ram P/U:.
- Going through the bonnet of your car: First approach, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most logical approach but it is not always easy to achieve, sometimes because of secondary parts that will obstruct your access. To achieve this, here are the simple steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been finished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Ram P/U. You may need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take out the bulb socket from its position. To achieve this, pull delicately on the socket and not on the wires (you risk damaging them), finally when the socket is out, you can swap your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the system, reconnect your battery and carry out a check test before taking to the road.
- By taking out the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Ram P/U in cases where the access through the engine block seems too complicated. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these actions are finished you will simply have to stick to the same method as on the previous section to swap the front daytime running light bulb of your Ram P/U
.
How to swap the rear parking light bulb on your Ram P/U
To finish , if you desire to swap the rear parking light bulb of your Ram P/U the technique is incredibly easier, here are the different guidelines to stick to to allow you to swap this bulb:
- Unplug your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Insert your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Examine that your parking lights are working correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Ram P/U, please go through our specific content to learn how to do it.
If you want more guides on the Ram P/U, go to our Ram P/U category.
