Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Ram P/U is one of the most classics. Even though this work is basic to execute, some of you are probably questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Ram P/U? We will now answer these questions.


Advantage to always have the brake fluid level up in your Ram P/U

So we start our content with the interest of looking at the brake fluid level on a Ram P/U. This fluid has a major role on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is therefore very important to examine the brake fluid level of your Ram P/U on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its properties. This process is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Ram P/U owners to do it on their own. If the Brake light on the dashboard of your Ram P/U does not match to a lack of brake fluid, do not be reluctant to consult our content for details. Nevertheless, there are some precautions and rules to follow that we will notice in the up coming section of this content.

How to fill up the brake fluid of a Ram P/U

So now we will learn to you how to do the brake fluid level on a Ram P/U. Please notice that this is very simple to perform. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this information in the user manual of your Ram P/U. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap mindfully so as not to make any mistakes within the the process, we advise you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Ram P/U up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Ram P/U, make sure examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

That’s it, you now have all the information you need to securely fill the brake fluid level of your Ram P/U.

If you have any additional questions about the Ram P/U, do not hesitate to consult our Ram P/U category.