It doesn’t matter if it’s for your own personal safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are in every case functioning is really important. In reality, bulbs are wearing parts that will predictably burn out in the future and therefore need to be changed. You’re perhaps in this article because one of your parking lights is burnt out and you’re worried about how to change your smart forfour’s license plate bulb, we’ve written this content page to help you do it without any help and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your smart forfour.
How to replace the license plate bulb on your smart forfour throughout the outside
This process is the fastest of the two, in truth, for this one you will simply have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content page to demonstrate the approach.
So let’s start with swapping the number plate bulb by going through the outside of your smart forfour. It doesn’t matter if it’s the front or the back of your vehicle the method will be identical.
Here are a few simple guidelines to stick to to conduct this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your smart forfour
- Use your screwdriver or knife to eject the bulb from its location, in the event you are worried of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your smart forfour without outside access
Second part of our content page, replace this license plate bulb on your smart forfour without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my smart forfour
To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my smart forfour
Finally last possibility, you must replace the bulb on the backplate of your smart forfour, but you cannot open the cover from the outside of your vehicle. In this instance, here is the method to do this operation:
- Unplug the battery from your smart forfour
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your smart forfour, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your smart forfour. If you wish to change other bulbs like the position light bulbs on your smart forfour or the low beam bulbs on smart forfour, don’t hesitate to consult our articles which describe you the procedure to follow.
If perhaps you have any additional questions about the smart forfour, do not hesitate to consult our smart forfour category.
