Regardless it’s for your own safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case functional is extremely important. Indeed, bulbs are wearing units that will undoubtedly burn out as time passes and as a consequence need to be changed. You’re most certainly on the website because one of your parking lights is burnt out and you’re struggling with how to change your seat ibiza’s license plate bulb, we’ve written this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your seat ibiza.
How to swap the license plate bulb on your seat ibiza throughout the outside
This technique is the fastest of the two, in reality, for this one you will only require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this document to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your seat ibiza. Regardless it’s the front or the back of your car the process will be identical.
Here are a few simple guidelines to stick to to carry out this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your seat ibiza
- Use your screwdriver or knife to eject the bulb from its location, in the event you are scared of destroying anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the success of the process.
.
How to replace the number plate bulb on your seat ibiza without outside access
Second section of our article, swap this license plate bulb on your seat ibiza without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my seat ibiza
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my seat ibiza
Finally last solution, you must swap the bulb on the backplate of your seat ibiza, but you cannot open the cover from the outside of your car. In this instance, here is the approach to do this operation:
- Unplug the battery from your seat ibiza
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your seat ibiza, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your seat ibiza. If you need to change other bulbs like the position light bulbs on your seat ibiza or the low beam bulbs on seat ibiza, don’t hesitate to consult our articles which demonstrate you the procedure to follow.
To find more tips on the seat ibiza, take a look at the seat ibiza category.
