It doesn’t matter if it’s for your own personal safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are all the time effective is very important. Indeed, bulbs are wearing parts that will obviously burn out with time and as a consequence need to be swapped out. You’re likely in this article because one of your parking lights is burnt out and you’re questioning how to change your Renault Clio 2’s license plate bulb, we’ve made this article to help you do it without any help and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Clio 2.
How to change the license plate bulb on your Renault Clio 2 throughout the outside
This process is the most simple of the two, actually, for this one you will just have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this content page to show you the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Renault Clio 2. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be the same.
Here are a few simple actions to follow to carry out this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Clio 2
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are afraid of breaking a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the successfulness of the procedure.
.
How to replace the number plate bulb on your Renault Clio 2 without outside access
Second section of our content, replace this license plate bulb on your Renault Clio 2 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Renault Clio 2
To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Renault Clio 2
Finally last option, you must change the bulb on the backplate of your Renault Clio 2, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the tactic to conduct this operation:
- Unplug the battery from your Renault Clio 2
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Clio 2, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Clio 2. If you need to change other bulbs like the position light bulbs on your Renault Clio 2 or the low beam bulbs on Renault Clio 2, don’t be reluctant to browse our content articles which demonstrate you the operation to follow.
Whenever you have any further questions about the Renault Clio 2, do not hesitate to consult our Renault Clio 2 category.
