Regardless it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time functional is very important. In fact, bulbs are wearing parts that will inevitably burn out after some time and as a result need to be replaced. You’re perhaps on this website because one of your parking lights is burnt out and you’re struggling with how to change your Peugeot 806’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 806.
How to replace the license plate bulb on your Peugeot 806 coming from the outside
This process is the simplest of the two, actually, for this one you will simply need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this content page to clarify the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Peugeot 806. Regardless it’s the front or the back of your motor vehicle the method will be the same.
Here are a few simple actions to stick to to execute this routine service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 806
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are scared of destroying a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Peugeot 806 without outside access
Second part of our document, swap this license plate bulb on your Peugeot 806 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Peugeot 806
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Peugeot 806
Finally last possibility, you must replace the bulb on the backplate of your Peugeot 806, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the tactic to perform this task:
- Unplug the battery from your Peugeot 806
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot 806, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Peugeot 806. If you want to change other bulbs like the position light bulbs on your Peugeot 806 or the low beam bulbs on Peugeot 806, don’t be reluctant to read our articles which describe you the operation to follow.
If you wish more tutorials on the Peugeot 806, go to our Peugeot 806 category.
