Regardless it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always functioning is extremely important. Indeed, bulbs are wearing auto parts that will obviously burn out as time passes and as a consequence need to be changed. You’re most certainly here because one of your parking lights is burnt out and you’re questioning how to change your Peugeot 308’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot 308.
How to change the license plate bulb on your Peugeot 308 coming from the outside
This approach is the most simple of the two, in reality, for this one you will simply require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article content to describe the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Peugeot 308. Regardless it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple actions to follow to conduct this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 308
- Use your screwdriver or knife to remove the bulb from its location, if you are scared of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the process.
.
How to change the number plate bulb on your Peugeot 308 without outside access
Second part of our document, replace this license plate bulb on your Peugeot 308 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Peugeot 308
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Peugeot 308
Finally last solution, you must change the bulb on the backplate of your Peugeot 308, but you cannot really open the cover from the outside of your automobile. In this instance, here is the process to accomplish this task:
- Disconnect the battery from your Peugeot 308
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot 308, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Peugeot 308. If you want to change other bulbs like the position light bulbs on your Peugeot 308 or the low beam bulbs on Peugeot 308, don’t be reluctant to consult our content articles which explain you the procedure to follow.
To discover more tips on the Peugeot 308, take a look at the Peugeot 308 category.
