Regardless it’s for your specific safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are in every case effective is fundamental. Indeed, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be replaced. You’re probably on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Frontier’s license plate bulb, we’ve written this content page to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Frontier.

change-license-plate-bulb-nissan-frontier

How to change the license plate bulb on your Nissan Frontier throughout the outside

This process is the quickest of the two, actually, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article to describe the method.
So let’s start with replacing the number plate bulb by going through the outside of your Nissan Frontier. Regardless it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple steps to follow to execute this maintenance tasks:

  • With the engine off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Frontier
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event that you are afraid of damaging a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the process.

How to change the number plate bulb on your Nissan Frontier without outside access

Second section of our content page, swap this license plate bulb on your Nissan Frontier without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Nissan Frontier

To change the one on the front plate, nothing could be easier, you will have to position yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Nissan Frontier

Finally last option, you must change the bulb on the backplate of your Nissan Frontier, but you simply cannot open the cover from the outside of your vehicle. In such a case, here is the approach to conduct this task:

  • Disconnect the battery from your Nissan Frontier
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Nissan Frontier, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Nissan Frontier. If you want to change other bulbs like the position light bulbs on your Nissan Frontier or the low beam bulbs on Nissan Frontier, don’t be reluctant to browse our content articles which demonstrate you the process to follow.

In the event that you have any additional questions about the Nissan Frontier, do not hesitate to consult our Nissan Frontier category.