It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is fundamental. In fact, bulbs are wearing parts that will obviously burn out as time passes and as a result need to be replaced. You’re almost certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Mercedes Classe C’s license plate bulb, we’ve made this article content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe C.
How to swap the license plate bulb on your Mercedes Classe C through the outside
This method is the most simple of the two, actually, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this content to demonstrate the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Classe C. It doesn’t matter if it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple steps to follow to conduct this service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe C
- Use your screwdriver or knife to eject the bulb from its place, if you are afraid of destroying a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.
.
How to replace the number plate bulb on your Mercedes Classe C without outside access
Second part of our content, swap this license plate bulb on your Mercedes Classe C without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Classe C
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Classe C
Finally last possibility, you must swap the bulb on the backplate of your Mercedes Classe C, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the method to conduct this task:
- Disconnect the battery from your Mercedes Classe C
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Classe C, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mercedes Classe C. If you want to change other bulbs like the position light bulbs on your Mercedes Classe C or the low beam bulbs on Mercedes Classe C, don’t hesitate to consult our content articles which describe you the process to follow.
If you want more guides on the Mercedes Classe C, go to our Mercedes Classe C category.
