It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time working is necessary. In reality, bulbs are wearing auto parts that will undoubtedly burn out over the years and as a consequence need to be swapped out. You’re almost certainly on this site because one of your parking lights is burnt out and you’re wondering how to change your Mercedes Classe A’s license plate bulb, we’ve made this document to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe A.
How to swap the license plate bulb on your Mercedes Classe A through the outside
This tactic is the least difficult of the two, in reality, for this one you will simply need to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this document to teach you the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Mercedes Classe A. It doesn’t matter if it’s the front or the back of your car the process will be similar.
Here are a few simple actions to follow to perform this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe A
- Use your screwdriver or knife to remove the bulb from its location, in the event you are afraid of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Mercedes Classe A without outside access
Second section of our content, change this license plate bulb on your Mercedes Classe A without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Classe A
To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Classe A
Finally last solution, you must swap the bulb on the backplate of your Mercedes Classe A, but you cannot really open the cover from the outside of your car. In such a case, here is the approach to accomplish this task:
- Unplug the battery from your Mercedes Classe A
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Classe A, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main ways for replacing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Mercedes Classe A. If you desire to change other bulbs like the position light bulbs on your Mercedes Classe A or the low beam bulbs on Mercedes Classe A, don’t hesitate to read our content articles which explain you the procedure to follow.
Whenever you have any further questions about the Mercedes Classe A, do not hesitate to consult our Mercedes Classe A category.
