Regardless it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly effective is fundamental. Indeed, bulbs are wearing auto parts that will predictably burn out after some time and therefore need to be changed. You’re almost certainly in this article because one of your parking lights is burnt out and you’re questioning how to change your Mercedes Benz M Class’s license plate bulb, we’ve written this document to help you do it all on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Benz M Class.

change-license-plate-bulb-mercedes-benz-m-class

How to change the license plate bulb on your Mercedes Benz M Class through the outside

This technique is the simplest of the two, in truth, for this one you will simply have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this document to explain the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Mercedes Benz M Class. Regardless it’s the front or the back of your car the process will be similar.
Here are a few simple steps to follow to conduct this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Benz M Class
  • .

  • Use your screwdriver or knife to eject the bulb from its placement, if you are scared of damaging anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.

How to replace the number plate bulb on your Mercedes Benz M Class without outside access

Second part of our content, replace this license plate bulb on your Mercedes Benz M Class without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Mercedes Benz M Class

To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much pressure or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Mercedes Benz M Class

Finally last option, you must change the bulb on the backplate of your Mercedes Benz M Class, but you cannot open the cover from the outside of your car. In this instance, here is the solution to do this operation:

  • Disconnect the battery from your Mercedes Benz M Class
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Mercedes Benz M Class, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Mercedes Benz M Class. If you desire to change other bulbs like the position light bulbs on your Mercedes Benz M Class or the low beam bulbs on Mercedes Benz M Class, don’t hesitate to consult our content articles which describe you the operation to follow.

In the event that you have any additional questions about the Mercedes Benz M Class, do not hesitate to consult our Mercedes Benz M Class category.