Recent cars all come with an astounding number of technology, however, due to your budget or the year of your Mercedes Benz M Class, you may not be sufficiently fortunate to have them all. Today we’re going to help you resolve this trouble by explaining how to install parking sensor on my Mercedes Benz M Class? Indeed, this feature is very handy, especially if you live in the city and have to park your car frequently in narrow parking places. To help you out, we’ll first take a look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Mercedes Benz M Class, and to finish, how much does a parking sensor cost?
How does parking sensors operate on an Mercedes Benz M Class?
So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Mercedes Benz M Class and an obstacle when you move back. It is therefore mainly good for owners who have to maneuver regularly, whose visibility is poor, or whose vehicle size is big.
Often installed as standard, the reverse sensors of a Mercedes Benz M Class incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will enhance in level with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Mercedes Benz M Class will enable you for parking, but also for security and avoiding pedestrians.
How to install parking sensors on a Mercedes Benz M Class?
We now advance to the step that you are almost certainly most excited about, installing reverse parking sensors on a Mercedes Benz M Class. This section is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Mercedes Benz M Class.
How to change a faulty backup sensors on a Mercedes Benz M Class
First we’ll see how to change a faulty parking sensor on an Mercedes Benz M Class. In the event that your Mercedes Benz M Class has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function effectively. Good thing for you this procedure is particularly simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take off the damaged parking sensor from your Mercedes Benz M Class, this step is fairly intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working effectively.
- You will only need to stick to the installation guidance, but we summarize here the main simple steps.
- Take off the bumper if you don’t have access to the inside of it.
- Reflect on the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Follow the installation owners manual which is accessible with some electrical bases.
- Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Mercedes Benz M Class
Now we go forward to the section you’re quite likely most excited about, how to install a reverse sensor set up on a Mercedes Benz M Class that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Mercedes Benz M Class for the installation, do not be reluctant to browse our content page on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mercedes Benz M Class
And to finish, we will now present you the installation of a drill-free parking sensors system on a Mercedes Benz M Class. There are two types, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Mercedes Benz M Class?
Price of changing a faulty reversing parking sensor for an Mercedes Benz M Class
The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Mercedes Benz M Class
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class set up.
Price of a parking sensors kit without drilling for a Mercedes Benz M Class
.
At last, for the price of a reversing radar without drilling for your Mercedes Benz M Class, what ever type you go for, you will have to pay between 30 and 60 euros.
If you have any further questions about the Mercedes Benz M Class, do not hesitate to consult our Mercedes Benz M Class category.
