Regardless whether it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time operational is fundamental. In fact, bulbs are wearing auto parts that will inevitably burn out with time and as a result need to be changed. You’re perhaps in this article because one of your parking lights is burnt out and you’re struggling with how to change your Kia E Niro’s license plate bulb, we’ve made this article content to help you do it on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia E Niro.
How to change the license plate bulb on your Kia E Niro through the outside
This process is the fastest of the two, in truth, for this one you will simply require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article to teach you the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Kia E Niro. Regardless whether it’s the front or the back of your automobile the technique will be the same.
Here are a few simple steps to stick to to perform this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia E Niro
- Use your screwdriver or knife to remove the bulb from its location, in the event you are worried of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Kia E Niro without outside access
Second part of our content page, swap this license plate bulb on your Kia E Niro without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Kia E Niro
To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Kia E Niro
Finally last solution, you must change the bulb on the backplate of your Kia E Niro, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the solution to do this operation:
- Unplug the battery from your Kia E Niro
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Kia E Niro, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Kia E Niro. If you desire to change other bulbs like the position light bulbs on your Kia E Niro or the low beam bulbs on Kia E Niro, don’t hesitate to consult our content articles which demonstrate you the operation to follow.
If you want more guides on the Kia E Niro, go to our Kia E Niro category.
