It doesn’t matter if it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always functional is very important. In reality, bulbs are wearing parts that will surely burn out over the years and as a consequence need to be replaced. You’re probably on this website because one of your parking lights is burnt out and you’re struggling with how to change your Jaguar XF’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Jaguar XF.
How to change the license plate bulb on your Jaguar XF through the outside
This technique is the most simple of the two, actually, for this one you will simply require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this article content to describe the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Jaguar XF. It doesn’t matter if it’s the front or the back of your car the technique will be identical.
Here are a few simple actions to follow to carry out this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Jaguar XF
- Use your screwdriver or knife to remove the bulb from its place, in the event you are afraid of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the operation.
.
How to replace the number plate bulb on your Jaguar XF without outside access
Second part of our content page, swap this license plate bulb on your Jaguar XF without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Jaguar XF
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Jaguar XF
Finally last possibility, you must change the bulb on the backplate of your Jaguar XF, but you are not able to open the cover from the outside of your car. In this case, here is the approach to execute this operation:
- Disconnect the battery from your Jaguar XF
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Jaguar XF, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Jaguar XF. If you need to change other bulbs like the position light bulbs on your Jaguar XF or the low beam bulbs on Jaguar XF, don’t hesitate to read our articles which demonstrate you the process to follow.
To discover more tips on the Jaguar XF, take a look at the Jaguar XF category.
