It doesn’t matter if it’s for your specific safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly working is extremely important. In reality, bulbs are wearing auto parts that will obviously burn out over the years and therefore need to be changed. You’re most certainly on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Isuzu D-Max’s license plate bulb, we’ve written and published this article content to help you do it without any help and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Isuzu D-Max.
How to swap the license plate bulb on your Isuzu D-Max throughout the outside
This option is the fastest of the two, in reality, for this one you will only require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this content to describe the way.
So let’s begin with changing the number plate bulb by going through the outside of your Isuzu D-Max. It doesn’t matter if it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple actions to stick to to perform this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Isuzu D-Max
- Use your screwdriver or knife to remove the bulb from its location, if you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Isuzu D-Max without outside access
Second section of our item, replace this license plate bulb on your Isuzu D-Max without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Isuzu D-Max
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Isuzu D-Max
Finally last possibility, you must swap the bulb on the backplate of your Isuzu D-Max, but you simply cannot open the cover from the outside of your vehicle. In such a case, here is the approach to execute this task:
- Unplug the battery from your Isuzu D-Max
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Isuzu D-Max, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Isuzu D-Max. If you desire to change other bulbs like the position light bulbs on your Isuzu D-Max or the low beam bulbs on Isuzu D-Max, don’t be reluctant to browse our articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Isuzu D-Max, do not hesitate to consult our Isuzu D-Max category.
