It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time functional is very important. In fact, bulbs are wearing auto parts that will predictably burn out as time passes and consequently need to be changed. You’re most likely on this website because one of your parking lights is burnt out and you’re questioning how to change your Hyundai Genesis’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Hyundai Genesis.
How to replace the license plate bulb on your Hyundai Genesis coming from the outside
This solution is the quickest of the two, in reality, for this one you will just have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this article to show you the way.
So let’s start with changing the number plate bulb by going through the outside of your Hyundai Genesis. It doesn’t matter if it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple actions to stick to to carry out this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Genesis
- Use your screwdriver or knife to remove the bulb from its placement, if you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the process.
.
How to change the number plate bulb on your Hyundai Genesis without outside access
Second section of our content, replace this license plate bulb on your Hyundai Genesis without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Hyundai Genesis
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Hyundai Genesis
Finally last option, you must replace the bulb on the backplate of your Hyundai Genesis, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the technique to operate this task:
- Unplug the battery from your Hyundai Genesis
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Hyundai Genesis, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Hyundai Genesis. If you need to change other bulbs like the position light bulbs on your Hyundai Genesis or the low beam bulbs on Hyundai Genesis, don’t be reluctant to browse our articles which demonstrate you the operation to follow.
To find more tips on the Hyundai Genesis, take a look at the Hyundai Genesis category.
