Do you have the sense of a power drop without any rational reason, and all this comes about in an unknown or usual manner? Maybe it’s because your Hyundai Genesis is going to limp mode . In fact, the security mode can be activated on a motor vehicle for a number of causes and the activation of this mode will set the engine’s performance, occasionally causing a momentary or irreversible loss of power from your Hyundai Genesis until you handle the problem. Our publishers wanted to write this guide so that you can deal with this matter, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to address these concerns, we will focus on the limp mode of your Hyundai Genesis. And secondly, what are the causes why your Hyundai Genesis goes into security mode?

limp-mode-hyundai-genesis

Hyundai Genesis THAT GOES TO limp mode: WHAT IS IT?

Let’s begin our article with the definition of your Hyundai Genesis that goes to limp mode . You almost certainly won’t have any information about the fact that this mode has been turned on and you will simply feel the outcomes. Usually the clues of a safety mode on your Hyundai Genesis will be that you will identify an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Hyundai Genesis more than complicated. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to recommend that you go to your auto technician to deal with the problem as quickly as possible. In fact, via your vehicle’s ECU and the various sensors that continuously monitor the procedure of your engine, your Hyundai Genesis that goes to security is in fact a kind of electronic flange of your engine. Nevertheless, you must be serious about this quickly because it almost certainly hides a concern that needs to be dealt with, however, especially with time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some scenarios, simply turning your Hyundai Genesis off and on again will be enough to turn off the security mode, in other situations the original concern must be fixed to return to normal behaviour.

Why is my Hyundai Genesis going into limp mode?

Now we’re going to outline the causes why your Hyundai Genesis is on limp mode. To begin with you can easily check if this is the circumstance by using your diagnostic plug and Hyundai Genesisreading the fault codes of your Hyundai Genesis. Please have a look at our dedicated guideline which shows you how to use these tools and interpret the fault codes of your Hyundai Genesis yourself. You should see a fault code displayed due to an engine component. Depending on the finish of your motor vehicle the on-board computer will as well tell you that you are in security mode. We will then see most of the parts that can produce your Hyundai Genesis safe.

  • Turbo: A defective turbo will immediately inform your computer and produce your motor vehicle safe.
  • The EGR valve: If your car is ever used in a really quiet method or just for short trips at low speed, it will occasionally clog up and cause the security mode to be activated.
  • The Particle Filter: A part famous for the problems it motives, in case your PAP is clogged, you will be subject to a safety shutdown of your Hyundai Genesis simply because your engine will not be able to properly exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the established motives of an Hyundai Genesis going into security. In fact, if it doesn’t manage the air/fuel mixture properly, your ECU will know the problem instantly.

In the event you have any other worries or questions about your motor vehicle, you can certainly find the remedy in our Hyundai Genesis Guide.

If you have any additional questions about the Hyundai Genesis, do not hesitate to consult our Hyundai Genesis category.