It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case working is really important. Indeed, bulbs are wearing parts that will obviously burn out with time and as a consequence need to be replaced. You’re quite likely on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Honda CR V’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Honda CR V.
How to replace the license plate bulb on your Honda CR V through the outside
This technique is the simplest of the two, actually, for this one you will only require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this content to demonstrate the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Honda CR V. It doesn’t matter if it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple steps to stick to to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda CR V
- Use your screwdriver or knife to remove the bulb from its place, if you are worried of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your Honda CR V without outside access
Second section of our item, swap this license plate bulb on your Honda CR V without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Honda CR V
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Honda CR V
Finally last solution, you must replace the bulb on the backplate of your Honda CR V, but you cannot open the cover from the outside of your vehicle. In such a case, here is the approach to accomplish this operation:
- Unplug the battery from your Honda CR V
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Honda CR V, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Honda CR V. If you desire to change other bulbs like the position light bulbs on your Honda CR V or the low beam bulbs on Honda CR V, don’t hesitate to browse our content articles which describe you the process to follow.
If you wish more guides on the Honda CR V, go to our Honda CR V category.
