Regardless it’s for your specific safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case working is necessary. Indeed, bulbs are wearing units that will predictably burn out as time passes and as a result need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re struggling with how to change your Ford Kuga’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Kuga.
How to replace the license plate bulb on your Ford Kuga through the outside
This option is the least difficult of the two, actually, for this one you will simply require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article content to teach you the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Ford Kuga. Regardless it’s the front or the back of your automobile the method will be similar.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Kuga
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are scared of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the success of the procedure.
.
How to replace the number plate bulb on your Ford Kuga without outside access
Second section of our document, swap this license plate bulb on your Ford Kuga without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Kuga
To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Kuga
Finally last possibility, you must replace the bulb on the backplate of your Ford Kuga, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the process to do this operation:
- Disconnect the battery from your Ford Kuga
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Kuga, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Ford Kuga. If you need to change other bulbs like the position light bulbs on your Ford Kuga or the low beam bulbs on Ford Kuga, don’t be reluctant to browse our content articles which demonstrate you the procedure to follow.
In the event that you have any additional questions about the Ford Kuga, do not hesitate to consult our Ford Kuga category.
