Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time functional is extremely important. In fact, bulbs are wearing parts that will inevitably burn out over the years and as a consequence need to be swapped out. You’re most certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Ford Fiesta 4’s license plate bulb, we’ve made this article to help you do it without any help and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford Fiesta 4.
How to replace the license plate bulb on your Ford Fiesta 4 coming from the outside
This option is the least difficult of the two, actually, for this one you will simply require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this article to clarify the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Ford Fiesta 4. Regardless whether it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Fiesta 4
- Use your screwdriver or knife to eject the bulb from its spot, if you are afraid of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the process.
.
How to change the number plate bulb on your Ford Fiesta 4 without outside access
Second section of our item, change this license plate bulb on your Ford Fiesta 4 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Fiesta 4
To replace the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Fiesta 4
Finally last option, you must replace the bulb on the backplate of your Ford Fiesta 4, but you are not able to open the cover from the outside of your motor vehicle. In this instance, here is the tactic to do this task:
- Unplug the battery from your Ford Fiesta 4
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Fiesta 4, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Ford Fiesta 4. If you want to change other bulbs like the position light bulbs on your Ford Fiesta 4 or the low beam bulbs on Ford Fiesta 4, don’t be reluctant to read our content articles which explain you the operation to follow.
To find more tips on the Ford Fiesta 4, take a look at the Ford Fiesta 4 category.
