Regardless whether it’s for your own security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always functioning is fundamental. In reality, bulbs are wearing auto parts that will surely burn out over the years and therefore need to be changed. You’re probably here because one of your parking lights is burnt out and you’re questioning how to change your Fiat Punto Evo’s license plate bulb, we’ve made this article content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Fiat Punto Evo.
How to replace the license plate bulb on your Fiat Punto Evo through the outside
This tactic is the quickest of the two, in fact, for this one you will only have to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this article content to demonstrate the method.
So let’s start with changing the number plate bulb by going through the outside of your Fiat Punto Evo. Regardless whether it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple actions to stick to to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Punto Evo
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are worried of damaging anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the process.
.
How to replace the number plate bulb on your Fiat Punto Evo without outside access
Second section of our document, change this license plate bulb on your Fiat Punto Evo without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Fiat Punto Evo
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Fiat Punto Evo
Finally last option, you must replace the bulb on the backplate of your Fiat Punto Evo, but you cannot open the cover from the outside of your automobile. In such a case, here is the solution to execute this task:
- Unplug the battery from your Fiat Punto Evo
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Fiat Punto Evo, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main ways for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Fiat Punto Evo. If you desire to change other bulbs like the position light bulbs on your Fiat Punto Evo or the low beam bulbs on Fiat Punto Evo, don’t be reluctant to read our articles which demonstrate you the procedure to follow.
To find more tips on the Fiat Punto Evo, take a look at the Fiat Punto Evo category.
