It doesn’t matter if it’s for your specific security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case working is really important. In reality, bulbs are wearing units that will predictably burn out after a while and consequently need to be replaced. You’re perhaps here because one of your parking lights is burnt out and you’re worried about how to change your Bmw Z4’s license plate bulb, we’ve created this article to help you do it without any help and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Z4.
How to swap the license plate bulb on your Bmw Z4 throughout the outside
This solution is the most simple of the two, in reality, for this one you will just require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content page to teach you the method.
So let’s start with replacing the number plate bulb by going through the outside of your Bmw Z4. It doesn’t matter if it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple guidelines to follow to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Z4
- Use your screwdriver or knife to eject the bulb from its placement, if you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the procedure.
.
How to change the number plate bulb on your Bmw Z4 without outside access
Second part of our article, swap this license plate bulb on your Bmw Z4 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Bmw Z4
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Bmw Z4
Finally last solution, you must swap the bulb on the backplate of your Bmw Z4, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the process to do this operation:
- Unplug the battery from your Bmw Z4
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Z4, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main ways for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Bmw Z4. If you want to change other bulbs like the position light bulbs on your Bmw Z4 or the low beam bulbs on Bmw Z4, don’t be reluctant to browse our content articles which explain you the operation to follow.
If you have any additional questions about the Bmw Z4, do not hesitate to consult our Bmw Z4 category.
